Conflict with TI code composer

• 報告者: mir_hossein
• 担当者: (未割り当て)
• チケットの種類: バグ
• 状況: 完了
• コンポーネント: Tera Term
• マイルストーン: (未割り当て)
• 優先度: 6
• 重要度: 5 - 中
• 解決法: なし
• ファイル: なし

詳細 返信

I use Teraterm to monitor the serial output of my custom board. On my system I have a COM port without USB to serial converter.

The OS is Windows 7 x64.

To debug the board, I use TI XDS100V2 and Code Composer Studio V6.0.1

If the Teraterm is open on COM1, the Code composer can not connect to the board. Closing Teraterm resolves the issue.

I checked that there is an FTDI chip on XDS100V2, means the XDS100V2 uses a kind of USB to serial interface but it does not enumerate itself as a COM port in device manager.

チケットの履歴 (3 件中 3 件表示)

2014-11-24 17:56 更新者: mir_hossein

• 新しいチケット "Conflict with TI code composer" が作成されました

2014-11-24 20:37 更新者: (del#1144)

コメント 返信

Your request seems to open one COM port by two applications, "Code Composer Studio" and "Tera Term".

I think COM port is exclusive access.

Is any terminal emulators, for example, PuTTY or Hyperterminal satisfies your wants?

2014-11-24 21:24 更新者: mir_hossein

• 状況 が オープン から 完了 に更新されました
• チケット完了時刻 が 2014-11-24 21:24 に更新されました

コメント 返信

Reply To maya

Your request seems to open one COM port by two applications, "Code Composer Studio" and "Tera Term". I think COM port is exclusive access. Is any terminal emulators, for example, PuTTY or Hyperterminal satisfies your wants?

Ok, I have checked with Hyperterminal and got the same result.
It seems that the problem is in "Code composer studio", I should discuss it with TI developers.
Thank you.