編集Linux version 2.6.18-6-686 (Debian 2.6.18.dfsg.1-18etch1) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Sun Feb 10 22:11:31 UTC 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000cfb50000 (usable)
BIOS-e820: 00000000cfb50000 - 00000000cfb66000 (reserved)
BIOS-e820: 00000000cfb66000 - 00000000cfb85c00 (ACPI data)
BIOS-e820: 00000000cfb85c00 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
Warning only 4GB will be used.
Use a PAE enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe710
On node 0 totalpages: 1048576
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 819200 pages, LIFO batch:31
DMI 2.4 present.
ACPI: RSDP (v002 DELL ) @ 0x000f1ce0
ACPI: XSDT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f1d7c
ACPI: FADT (v003 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f1ebc
ACPI: MADT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f1fb0
ACPI: SPCR (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2067
ACPI: HPET (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f20b7
ACPI: MCFG (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f20ef
ACPI: WD__ (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f212b
ACPI: SLIC (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f225f
ACPI: ERST (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0xcfb6aad8
ACPI: HEST (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0xcfb6ace8
ACPI: BERT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0xcfb6a958
ACPI: EINJ (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0xcfb6a988
ACPI: TCPA (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f23e1
ACPI: DSDT (v001 DELL PE_SC3 0x00000001 INTL 0x20050624) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
Processor #4 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
Processor #5 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] enabled)
Processor #2 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
Processor #6 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
Processor #3 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
Processor #7 7:7 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
Detected 2826.355 MHz processor.
Built 1 zonelists. Total pages: 1048576
Kernel command line: root=/dev/sda1 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3360920k/4194304k available (1541k kernel code, 40908k reserved, 580k data, 196k init, 2485568k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Using HPET for base-timer
Calibrating delay using timer specific routine.. 5656.38 BogoMIPS (lpj=11312770)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 000ce3bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 000ce3bd 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 000ce3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
CPU0: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5652.57 BogoMIPS (lpj=11305148)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 000ce3bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 000ce3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 000ce3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 2/2 eip 3000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5652.64 BogoMIPS (lpj=11305282)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 000ce3bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 000ce3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 000ce3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 3/3 eip 3000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5652.58 BogoMIPS (lpj=11305179)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 000ce3bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 000ce3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 000ce3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 4/4 eip 3000
Initializing CPU#4
Calibrating delay using timer specific routine.. 5652.66 BogoMIPS (lpj=11305335)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 000ce3bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 000ce3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 000ce3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#4.
CPU4: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 5/5 eip 3000
Initializing CPU#5
Calibrating delay using timer specific routine.. 5652.66 BogoMIPS (lpj=11305324)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 000ce3bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 000ce3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 000ce3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#5.
CPU5: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 6/6 eip 3000
Initializing CPU#6
Calibrating delay using timer specific routine.. 5652.64 BogoMIPS (lpj=11305288)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 000ce3bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 000ce3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 000ce3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#6.
CPU6: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 7/7 eip 3000
Initializing CPU#7
Calibrating delay using timer specific routine.. 5652.64 BogoMIPS (lpj=11305288)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 000ce3bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 000ce3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 000ce3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#7.
CPU7: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
Total of 8 processors activated (45224.80 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 8 CPUs: passed.
Brought up 8 CPUs
migration_cost=50,12660
checking if image is initramfs... it is
Freeing initrd memory: 4384k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:0e:0d.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.PE2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 *5 6 7 10 11 12)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:08: ioport range 0x800-0x87f could not be reserved
pnp: 00:08: ioport range 0x880-0x8bf has been reserved
pnp: 00:08: ioport range 0x8c0-0x8df has been reserved
pnp: 00:08: ioport range 0x8e0-0x8e3 has been reserved
pnp: 00:08: ioport range 0x900-0x900 has been reserved
pnp: 00:08: ioport range 0xc00-0xc7f has been reserved
pnp: 00:08: ioport range 0xca0-0xca7 has been reserved
pnp: 00:08: ioport range 0xca9-0xcab has been reserved
pnp: 00:09: ioport range 0xca8-0xca8 has been reserved
pnp: 00:09: ioport range 0xcac-0xcac has been reserved
PCI: Bridge: 0000:06:00.0
IO window: disabled.
MEM window: f4000000-f7ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:05:00.0
IO window: disabled.
MEM window: f4000000-f7ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:05:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:04:00.0
IO window: disabled.
MEM window: f4000000-f7ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:04:00.3
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: f2000000-f7ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: e000-efff
MEM window: fc300000-fc4fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.0
IO window: disabled.
MEM window: f8000000-fbffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: f8000000-fbffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: d000-dfff
MEM window: fc100000-fc2fffff
PREFETCH window: d8000000-dfffffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:02.0 to 64
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:04:00.0 to 64
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:05:00.0 to 64
PCI: Setting latency timer of device 0000:06:00.0 to 64
ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:05:01.0 to 64
PCI: Setting latency timer of device 0000:04:00.3 to 64
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:03.0 to 64
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1204557960.232:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie01]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie01]
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie01]
PCI: Setting latency timer of device 0000:00:05.0 to 64
pcie_portdrv_probe->Dev[25e5:8086] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
Allocate Port Service[0000:00:05.0:pcie01]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
Allocate Port Service[0000:00:06.0:pcie01]
PCI: Setting latency timer of device 0000:00:07.0 to 64
pcie_portdrv_probe->Dev[25e7:8086] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
Allocate Port Service[0000:00:07.0:pcie01]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:04:00.0 to 64
Allocate Port Service[0000:04:00.0:pcie10]
Allocate Port Service[0000:04:00.0:pcie11]
PCI: Setting latency timer of device 0000:05:00.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:05:00.0:pcie20]
Allocate Port Service[0000:05:00.0:pcie21]
PCI: Setting latency timer of device 0000:05:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:05:01.0:pcie20]
Allocate Port Service[0000:05:01.0:pcie21]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Starting balanced_irq
Using IPI No-Shortcut mode
ACPI: (supports S0 S4 S5)
Freeing unused kernel memory: 196k freed
Time: tsc clocksource has been installed.
SCSI subsystem initialized
megasas: 00.00.03.01 Sun May 14 22:49:52 PDT 2006
megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 1:slot 0:func 0
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:01:00.0 to 64
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
scsi0 : LSI Logic SAS based MegaRAID driver
Vendor: SEAGATE Model: ST973451SS Rev: SM04
Type: Direct-Access ANSI SCSI revision: 05
Vendor: SEAGATE Model: ST973451SS Rev: SM04
Type: Direct-Access ANSI SCSI revision: 05
Vendor: SEAGATE Model: ST973451SS Rev: SM04
Type: Direct-Access ANSI SCSI revision: 05
Vendor: SEAGATE Model: ST973451SS Rev: SM04
Type: Direct-Access ANSI SCSI revision: 05
Vendor: DP Model: BACKPLANE Rev: 1.05
Type: Enclosure ANSI SCSI revision: 05
Vendor: DELL Model: PERC 6/i Rev: 1.11
Type: Direct-Access ANSI SCSI revision: 05
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 66, io mem 0xfc500000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
SCSI device sda: 284164096 512-byte hdwr sectors (145492 MB)
sda: Write Protect is off
sda: Mode Sense: 1f 00 00 08
SCSI device sda: drive cache: write back
SCSI device sda: 284164096 512-byte hdwr sectors (145492 MB)
sda: Write Protect is off
sda: Mode Sense: 1f 00 00 08
SCSI device sda: drive cache: write back
sda: sda1 sda2 < sda5 sda6 >
sd 0:2:0:0: Attached scsi disk sda
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 66, io base 0x0000cce0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 74
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 74, io base 0x0000ccc0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 66, io base 0x0000cca0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 20 (level, low) -> IRQ 74
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 74, io base 0x0000cc80
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 2 ports detected
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.4.44 (August 10, 2006)
ESB2: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
ESB2: chipset revision 9
ESB2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 169
eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 169, node addr 001c23d982b2
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 169, node addr 001c23d982b0
hda: HL-DT-STDVD-ROM GDR-T10N, ATAPI CD/DVD-ROM drive
usb 1-5: new high speed USB device using ehci_hcd and address 5
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X DVD-ROM drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 3-2: new low speed USB device using uhci_hcd and address 3
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
usb 3-2: configuration #1 chosen from 1 choice
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Real Time Clock Driver v1.12ac
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
intel_rng: FWH not detected
input: PC Speaker as /class/input/input0
usb 1-1.1: new full speed USB device using ehci_hcd and address 6
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-1.2: new high speed USB device using ehci_hcd and address 7
usb 1-1.2: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: USB Optical Mouse as /class/input/input1
input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1
Initializing USB Mass Storage driver...
input: Dell Dell USB Keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-2
input: Dell DRAC5 as /class/input/input3
input: USB HID v1.10 Keyboard [Dell DRAC5] on usb-0000:00:1d.7-1.1
input: Dell DRAC5 as /class/input/input4
input: USB HID v1.10 Mouse [Dell DRAC5] on usb-0000:00:1d.7-1.1
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
ts: Compaq touchscreen protocol output
Adding 2650684k swap on /dev/sda5. Priority:-1 extents:1 across:2650684k
EXT3 FS on sda1, internal journal
Vendor: Dell Model: Virtual CDROM Rev: 123
Type: CD-ROM ANSI SCSI revision: 00
Vendor: Dell Model: Virtual Floppy Rev: 123
Type: Direct-Access ANSI SCSI revision: 00
usb-storage: device scan complete
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 caddy
sr 1:0:0:0: Attached scsi CD-ROM sr0
scsi 0:0:32:0: Attached scsi generic sg0 type 13
sd 0:2:0:0: Attached scsi generic sg1 type 0
sr 1:0:0:0: Attached scsi generic sg2 type 5
sd 2:0:0:0: Attached scsi removable disk sdb
sd 2:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
loop: loaded (max 8 devices)
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
bnx2: eth0: using MSI
ACPI: Power Button (FF) [PWRF]
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6 over IPv4 tunneling driver
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
[ページ情報]
更新日時: 2008-03-30 16:36:46, 更新者: nabeshin
[権限]
表示:無制限, 編集:ログインユーザ, 削除/設定:文書編集者