ダウンロードリスト

プロジェクト概要

mcelog is a daemon to handle machine check events (hardware errors) on x86-64 machines running an x86 Linux kernel. It accounts and logs CPU and memory errors, supports triggers on error thresholds, and can predictively offline memory pages and CPUs based on error trends. This daemon should run on all x86 Linux systems that want to handle hardware errors.

システム要件

システム要件が設定されていません
プロジェクトのリリース情報やプロジェクトリソースの情報です。
注: プロジェクトリソースの情報は Freecode.com ページからの引用です。ダウンロードそのものは、OSDNにホスティングされているものではありません。

2009-12-26 01:23
1.0pre2

この1.0に向けてのテストリリースです。いくつかのより多くのテスト後に最小限の変更で1.0になる必要があります。 1.0ストリーム)や、テストスイートを古いリリースに比べて多くの変化:新しいインテルのCPUをサポートし、デーモンモードでは、メモリDIMMエラーの追跡、不正なページ(一緒に2.6.33のLinuxカーネルでの障害予測分析を使用してのオフラインサポートしていますはるかに。は、0.9ストリームを放棄されている注意してください。
タグ: Major, Testing
This is a test release towards 1.0. It should become 1.0 with minimal
changes after some more testing. The 1.0 stream has lots of changes
over older releases: new Intel CPU support, a daemon mode, memory DIMM
error tracking, support for bad page offlining using predictive failure
analysis (together with a 2.6.33 Linux kernel), a test suite, and much
more. Note that the 0.9 stream has been abandoned.

2006-05-03 14:39
0.7

修飾子はコマンドラインのオプションになった後、許可されて- asciiです。デコードされたアドレスは、もはや2回印刷されます- asciiです。 SMBIOSの複数のマシン上にない場合、アンカーが見つかった場合はクラッシュしなくなりました動作するように修正されたスキャンのアンカー。 -固定されたmcelogの出力の再解析asciiです。 NONEをエントリSMBIOSのに印刷されていません。
タグ: Minor bugfixes
Modifier command line options are now allowed
after --ascii. A decoded address is no longer
printed twice for --ascii. The SMBIOS anchor scan
was fixed to work on more machines and no longer
crashes when no anchor is found. --ascii reparsing
of mcelog output was fixed. NONE entries are not
printed in SMBIOS.

2006-02-08 16:31
0.6

-固定されたmcelogの出力の再解析アスキー-フィルタが追加され、壊れてK8のガートアウトエラーがフィルタリングされる。 - ignorenodev引数が追加され、cronスクリプトで使用されます(これは)Xenゲストのカーネルではcronのエラーを回避できます。の新規メッセージ- DMIの引数SMBIOSのでDIMMの番号にマシンチェックアドレスを解決するために追加された(ただし、この広範な普及のBIOSのバグ)。引数のデコードをサポートするため、固定されたため、信頼性がない-と、任意の順序で引数を許可します。 -アスキーのマンページで明らかにされた。
--ascii reparsing of mcelog output was fixed.
--filter was added and known broken K8 GART errors
are filtered out. The --ignorenodev argument was
added and is used in the cron script (which avoids
cron errors in Xen guest kernels). The new --dmi
argument was added to resolve machine check
addresses to DIMM numbers in SMBIOS (however, this
is unreliable due to wide-spread BIOS bugs).
Argument decoding was fixed to support -- and to
allow arguments in any order. --ascii was
clarified in the manpage.

2005-12-19 20:21
0.5

このリリースでは、インテルP4/XeonマシンチェックのためにP4のデコーダがあります。これは(2.6.15のニーズ+)AMD K8のリビジョンFの内- manページのasciiの説明を明らかにされているDRAMのエラーしきい値レジスタをサポートしています。
タグ: Minor feature enhancements
This release has a P4 decoder for Intel P4/Xeon machine checks. It has support for DRAM error threshold registers (needs 2.6.15+) in AMD K8 Revision F. The --ascii description in the man page has been clarified.

2005-01-26 18:29
0.3

は、Linux 2.4カーネルのコードからK8のデコーダOpteron/Athlon64ログをデコードするために追加されました。 -アスキー関数は、致命的なカーネルの出力をデコードするために追加されました。マン改善されました。 32ビットのバグが修正された。初期化変数にcheck_cpu修正されました。マイナーのクリーンアップが行われた。
タグ: Initial freshmeat announcement
The K8 decoder from the Linux 2.4 Kernel code was
added to decode Opteron/Athlon64 logs. The --ascii
function was added to decode fatal kernel output.
The manpage was improved. 32-bit bugs were fixed.
An uninitialized variable in check_cpu was fixed.
Minor cleanups were made.

プロジェクトリソース